HIKVISION HiLook Series Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION HiLook Series. HIKVISION HiLook Series 18 pagina's. Smart hybrid light bullet & turret camera
Ook voor HIKVISION HiLook Series: Snelstarthandleiding (18 pagina's), Gebruikershandleiding (14 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (18 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (17 pagina's)

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Take apart the junction box.

5. Secure the junction box body on the ceiling with PA4

× 25 screws that come with the junction box.

Figure 2-7 Secure the Junction Box Body

6. Route the cables through the bottom cable hole or

the side cable hole of the junction box.

7. Combine the junction box cover with its body and

secure it with three PM3 screws.

Figure 2-8 Combine the Junction Box Cover and Body

8. Fix the mounting base onto the junction box with

three M4 × 10 screws.

9. Connect the cables and put them back into the

junction box.

10. Refer to steps 5, 7, and 8 of 2.1.1 Ceiling Mounting

without Junction Box to finish the installation.

2.1.3 Wall Mounting

Before you start:

You need to purchase a wall mount in advance.

Steps:

1. Drill Φ 10 mm screw holes in the wall where you

want to install the wall mount.

2. Use four M6 expansion bolts to fix the wall mount

onto the wall.

Figure 2-6 Drill Template

Figure 2-9 Fix the Wall Mount