HIKVISION HiLook Series Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION HiLook Series. HIKVISION HiLook Series 14 pagina's. Smart hybrid light bullet & turret camera
Ook voor HIKVISION HiLook Series: Snelstarthandleiding (18 pagina's), Gebruikershandleiding (18 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (18 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (17 pagina's)

Figure 2-6 Secure the Junction Box on the Wall

7. Route the cables through the bottom cable hole or

side cable hole of the junction box and connect the

cables.

8. Fix the junction box cover on its body with three

PM3 × 16 L6 screws that come with the junction

box.

Figure 2-7 Fix the Junction Box Cover on Its

9. Repeat steps 6 to 7 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to finish the installation.

2.2 Installation of Type II Camera

2.2.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The ceiling mounting and wall mounting are similar.

Following steps take ceiling mounting as an example.

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Cable

Hole

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

Scr ew H ol e

Side Opening

Figure 2-8 Drill Template

Body

Scr ew H ol e

template