Airfree Orb Plus Beknopte handleiding - Pagina 4
Blader online of download pdf Beknopte handleiding voor {categorie_naam} Airfree Orb Plus. Airfree Orb Plus 8 pagina's.
Before you start using your Airfree® Orb or Orb Plus
Place your Orb or Orb Plus over furniture, out of the reach of children. The mist is
not to be directed at any object wall, curtains, etc or the water can cause damage.
Airfree® is not liable for any water damage caused by the improper positioning,
handling or operation of the device.
To fill the sphere tank, carefully remove it from the base and hold it upside down,
preferably with silicone gloves. Remove the soft white adaptor by carefully twisting
it and fill the thank sphere with pure water. Beware that water will make the sphere
tank slippery. After filling please wipe it with a cloth and attach the sphere tank in the
humidifier's groove. The sphere tank will not leak when turning it up, eventually some
drops can occur.
To start the device, connect the DC Power Supply unit to the humidifier (plug located
on the base of the humidifier) before attaching the sphere tank. Add the tank and then
connect the DC Power Supply unit to the nearest socket.
Do not invert, tilt or shake the Airfree® Orb or Orb plus when the sphere tank is
attached as it sphere tank can fall and break. Tilting can also leak water from the
internal tank and damage the circuit board.
Make sure the humidifier is empty when transporting it.
Operation Start
Touch button located at the front, circled by 5 openings, controls the operation.
• To turn on - press once - the 5 openings will light up
• To turn off the device - press once for 6 seconds – the touch button lights will shut
off
• To turn off the touch button lights - press for 2 seconds.
• To turn on the touch button lights - press for 2 seconds.
• Orb and Orb plus will turn OFF if no water in the internal tank.
Please make sure you read the instructions for the right version.
Airfree
Orb
®
• The Airfree® Orb has 3 manual mist levels, 50 - 75 - 100ml/h.
• When turning the device ON, the unit will start working at maximum power and the
5 openings circling the touch button will light up blue.
• To change mist level - press once touch button.
Only for Airfree® Orb Plus
• The Airfree® Orb Plus has 5 manual Mist Levels, 50, 75, 100, and 150ml/h +
Automatic Mode.
• When turning the device ON, the touch button leds will light up green and the unit
will start working at maximum power.
• To change to the next level, just press once touch button.
• After the reduced mist level comes the automatic mode identified when the touch
buttom leds turn blue.
Installing and Connecting
4