JAMO MPA-201 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} JAMO MPA-201. JAMO MPA-201 16 pagina's. Multi-purpose amplifier

JAMO MPA-201 Gebruikershandleiding

Introduction

Congratulations on your purchase of your new Jamo
backed by state-of-the-art engineering and manufacturing techniques to bring you the best
quality craftsmanship and reliable performance.
The
MPA-201 is
and
two-channel
chassis is designed for
component.
It allows you to
left and right rear
Bridge mode capability allows the use of the two channels connected together to form one high
power amplifier channel, providing 200 watts
The MPA-201 is also a
OFF position it becomes full
The power rating for the Jamo MPA-201
load impedances and high intensity sine wave
loudspeaker will vary with frequency,deviating somewhat from the loudspeaker manufacturer's
nominal impedance rating.
This Jamo amplifier has been specially designed
a
rated impedance of 4 Ohms or

Features

1. Power output, rated at 2x100 Watts (stereo) into 4 Ohm
2. High power output (bridged mode), rated at 200 Watts into 8 Ohm
3. Subwoofer amplifier, adjustable crossover
4. Full
range amplifier
5.
Extensive heat sinks
6. High current discrete power transistors in the output stage
performance
7. Automatic power turn "ON"
8. Level control
9. Gold plated RCA input and output jacks
10. Heavy duty push button binding posts
11. Overload protection
4
specifically designed for home theatre applications. Because of its ample power
capacity
(stereo),it can
convenient shelf or
use one amplifier as
(surround)
speakers and
subwoofer amplifier with adjustable
range
amplifier.
higher.
for reliable operation and long
Multi-Purpose
fit into virtually any surround application.Narrow width
system rack mounting in the space of the one stereo
left and right stereo front speakers,
third
amplifier use for centre
into 8 Ohm.
power amplifier are obtained using fixed
test
tones. However, the
to drive any modern loudspeaker system with
frequency 50 Hz --150 Hz
Amplifier (MPA-201). It is
second amplifier use as
channel.
electronic crossover. With switch in
actual
impedance of the
life of the
amplifier
for the best possible
value test