Lexmark 34S0409 - E 360dt B/W Laser Printer (Duits) Aanvullend handboek - Pagina 4
Blader online of download pdf (Duits) Aanvullend handboek voor {categorie_naam} Lexmark 34S0409 - E 360dt B/W Laser Printer. Lexmark 34S0409 - E 360dt B/W Laser Printer 9 pagina's. Loading paper
Ook voor Lexmark 34S0409 - E 360dt B/W Laser Printer: Handleiding voor probleemoplossing (8 pagina's), Onderhoudshandleiding (10 pagina's)
Pagina afdrukken
3
Grasp the handle, and pull the extension so it flips forward.
4
Guide the extension down gently so the multipurpose feeder
is extended fully and open.
Loading the multipurpose feeder
1
Squeeze the tab located on the right width guide, and move
the guides out fully.
2
Prepare the paper or specialty media for loading.
•
Flex sheets of paper or paper labels back and forth to
loosen them, and then fan them. Do not fold or crease the
paper or labels. Straighten the edges on a level surface.
•
Hold transparencies by the edges, and then fan them.
Straighten the edges on a level surface.
Note: Avoid touching the print side of the transparencies.
Be careful not to scratch them.
4
•
Flex a stack of envelopes back and forth to loosen them,
and then fan them. Straighten the edges on a level surface.
Note: Fanning prevents the edges of envelopes from
sticking together. It also helps them feed properly to
avoid jams. Do not fold or crease envelopes.
3
Load the paper or specialty media.
Notes:
•
Do not force any paper into the multipurpose feeder.
Overfilling may cause jams.
•
Do not exceed the maximum stack height by forcing paper
or specialty media under the stack height limiters which
are located on the guides.