Avantree Saturn Pro Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantree Saturn Pro. Avantree Saturn Pro 10 pagina's. Low latency bluetooth receiver and transmitter 2-in-1
Ook voor Avantree Saturn Pro: Gebruikershandleiding (3 pagina's)
Pagina afdrukken
- 1. Product Description
- 2. Product Overview
- 3. What’s in the Box
- 4. Charging
- 5. Transmitter - Turn on / off
- 6. Transmitter - Pairing with a Bluetooth Device
- 7. Pairing Procedure
- 8. LED Indications
- 9. Receiver - Turn on / off
- 10. Receiver - Pairing with a Bluetooth Device
- 11. Obtaining the Maximum Stable Range
- 12. Use Two as a Pair
- 13. Reconnect
- 14. Restore Factory Default Setting
- 15. Product Specification
- 16. Safety Information
9. Reconnect
A. Automatic connect: When Saturn Pro is powered up, it will automatically reconnect with the last connected device.
B．Manual connect: When Saturn Pro is in standby mode and not connected to any device, a single short press of the MFB will
automatically reconnect the last connected device.
C. Auto off: Saturn Pro will automatically power off if no devices are connected within 5 minutes.
10. Restore Factory Default Setting
Ensure Saturn Pro is powered off, then press and hold the MFB for 10 -12 seconds, until both the BLUE and RED LEDs are both on for
about one second.
11. Product Specification
Bluetooth 3.0 with EDR
Bluetooth profile: A2DP and AVRCP
Audio codec: aptX-LL, aptX, SBC, AAC
Operating Range: Class 2, 10 meters
TX mode battery hours: up to 15 hours
RX mode battery hours: up to 10 hours
Standby time: up to 150 hours
Charging time: around 2-3 hours
Charging input voltage: DC 5V
Battery: 270mAH rechargeable LI-Lon battery
Weight: Approx 48.5g
Size: 50mm(L) x 37mm(W) x 13mm(H)
Working and standby times may vary when used with different mobile phones or other Bluetooth devices, usage settings, usage