Airgineers Micro Drone Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Airgineers Micro Drone. Airgineers Micro Drone 16 pagina's.

Binding the drone to the transmitt er

STEP 1

Remove the canopy from the frame

by unscrewing the two screws

STEP 3

A green LED (fast blink) means the receiver is in

the bind mode, you can now release the button.

STEP 2

TIP: Get someone to help you with this step. The battery needs to be connected at the same time as pressing the

button on the receiver board to bind correctly. While pressing down on the button on the receiver connect the

battery, as shown. Hold down the button on the receiver until the green LED (fast blink) comes ON (see Step3).

STEP 4

STICK

DOWN

PRESS

Battery connectors

Reciever button

ALL

Turn on the transmitter by

SWITCHES

pressing the two ON/OFF

buttons located either side

of the screen. Make sure

that all switches are in the

up position and the left-

hand control stick is down.

PRESS

Airginners Manual version 1.0 2022