Avari Fitness Avari Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avari Fitness Avari. Avari Fitness Avari 18 pagina's. Free stride

Pagina afdrukken

OPERATIONAL INSTRUCTIONS

ADJUSTING RESISTANCE

The resistance of the shocks can be adjusted by sliding

SHOCK ADJUSTMENTS

the

ARMS(7, 8).

Position the

the front end of the slot to provide the lowest resistance

and the fastest workout pace. Position the

ADJUSTMENTS

at the back end of the slot to provide

the highest resistance and the slowest workout pace.

CAUTION:

HOT

1. The shocks get

T KNOBS(16)

2. Tighten the

AVARI® Free Stride Stepper.

STORAGE

1. To store the AVARI® Free Stride Stepper, simply keep it in a clean dry place.

2. Grasp the HANDLEBAR(11) and REAR STABILIZER(3) to move the AVARI® Free Stride Stepper,

two people are required for moving.

3. To avoid damage to the electronics, remove the batteries before storing the AVARI® Free Stride

Stepper for one year or more.

MAINTENANCE

The safety and integrity designed into the AVARI® Free Stride Stepper can only be maintained when

the AVARI® Free Stride Stepper is regularly examined for damage and wear. Special attention should

be given to the following:

1. Verify that the Shocks provide resistance.

2. Shocks on steppers get

to cool.

3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.

Tighten loose nuts and bolts.

4. Verify that the CAUTION LABEL(46) is in place and easy to read. Call Stamina Products immediately

at 1-800-375-7520 for a replacement CAUTION LABEL(46) if it is missing or damaged.

5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

6. Worn or damaged components shall be replaced immediately or the AVARI® Free Stride Stepper

removed from service until repair is made.

7. Only Stamina Products supplied components shall be used to maintain/repair the AVARI® Free

Stride Stepper.

8. Keep your AVARI® Free Stride Stepper clean by wiping it off with an absorbent cloth after use.

in the slot on the

SHOCK ADJUSTMENTS

after a few minutes of use.

securely before using the

HOT

during use. To avoid burns, do not touch the shocks until they have time

PEDAL

SHOCK

ADJUSTMENT