Lexmark 652de - X MFP B/W Laser Handleiding voor probleemoplossing - Pagina 7
Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Lexmark 652de - X MFP B/W Laser. Lexmark 652de - X MFP B/W Laser 13 pagina's. Setup sheet
Ook voor Lexmark 652de - X MFP B/W Laser: Handmatig (6 pagina's), Gebruikershandleiding (12 pagina's), Informatie handleiding (19 pagina's), Setupblad (2 pagina's)
Pagina afdrukken
Internal Solutions Port
TM
If the Lexmark
Internal Solutions Port (ISP) does not operate
correctly, then these are possible solutions. Try one or more of the
following:
C
ISP
HECK THE
CONNECTIONS
•
Make sure the ISP is securely attached to the printer system
board.
•
Make sure the cable is securely connected to the correct
connector.
C
HECK THE CABLE
Make sure you are using the correct cable and that it is securely
connected.
M
AKE SURE THE NETWORK SOFTWARE IS CONFIGURED
CORRECTLY
For information about installing software for network printing,
see the Networking Guide on the Software and Documentation
CD
Memory card
Make sure the memory card is securely connected to the printer
system board.
Solving paper feed problems
Paper frequently jams
These are possible solutions. Try one or more of the following:
C
HECK THE PAPER
Use recommended paper and specialty media. For more
information, see the chapter about paper and specialty media
guidelines.
M
AKE SURE THERE IS NOT TOO MUCH PAPER IN THE
PAPER TRAY
Make sure the stack of paper you load does not exceed the
maximum stack height indicated in the tray or on the
multipurpose feeder.
C
HECK THE PAPER GUIDES
Move the guides in the tray to the correct positions for the
paper size loaded.
T
HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO
HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
Paper jam message remains after jam
is cleared
C
HECK THE PAPER PATH
The paper path is not clear. Clear jammed paper from the entire
paper path, and then touch Continue.
Page that jammed does not reprint
after you clear the jam
T
J
R
URN ON
AM
ECOVERY
In the Setup menu, Jam Recovery is set to Off. Set Jam Recovery
to Auto or On:
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
.
3
Touch Settings.
4
Touch General Settings.
5
Touch the down arrow until Print Recovery appears.
6
Touch Print Recovery.
7
Touch the right arrow next to Jam Recovery until On or
Auto appears.
7
8
Touch Submit.
9
Touch
.
Solving print quality problems
The information in the following topics may help you solve print
quality problems. If these suggestions still do not correct the
problem, contact Customer Support. You may have a printer part
that requires adjustment or replacement.
Isolating print quality problems
To help isolate print quality problems, print the print quality test
pages:
1
Turn the printer off.
2
Load Letter- or A4-size paper in the tray.
3
Hold down
and
while turning the printer on.
4
Release the buttons when the screen with the progress bar
appears.
The printer performs a power-on sequence, and then the
Configuration menu appears.
5
Touch the down arrow until Print Quality Pages
appears.
6
Touch Print Quality Pages.
The print quality test pages print.
7
Touch Back.
8
Touch Exit Configuration.
Blank pages
These are possible solutions. Try one or more of the following: