Airgle 750 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Airgle 750. Airgle 750 15 pagina's. Air purifier
Ook voor Airgle 750: Handmatig (9 pagina's)

Pagina afdrukken

1. Replacing the Filters

CLEANING THE FILTERS

When Should I Clean the Filters?

The filter condition can be checked and monitored through the built-in filter check device. Typically,

filters will need cleaning after three (3) months of regular use. When this device shows a poor

condition level reading for the filters, you must replace the Activated Carbon (deodorization) filters

and HEPA filters. The Pre-Filters and High Airflow filters are easy to wash and reuse.

CLEANING THE PRE-FILTER

Carefully remove the pre-filter. Shake it out or brush it off – preferably over a sink or outdoors to

minimize the spread of the accumulated dust and lint. For tough accumulations, you may use a

vacuum or rub it down with an all-purpose alkaline detergent-based cleaner. Rinse thoroughly after

each cleaning. After cleaning, allow to dry and reinsert.

Note: For maximum performance, the surface of the dust sensor should be cleaned at least once in

a month.