HIKVISION DS-7108NI-K1/W/M Snelstarthandleiding - Pagina 9

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} HIKVISION DS-7108NI-K1/W/M. HIKVISION DS-7108NI-K1/W/M 20 pagina's.

Chapter 2 Installation and Connections

During the device installation:

● Use brackets for rack mounting.

● Ensure ample room for audio and video cables.

● When routing cables, ensure the bend radius of the cables are no less than five times of its

diameter.

● Allow at least 2 cm (≈0.75 inch) of space among racks mounted devices.

● Ensure the device is grounded.

● Environmental temperature should be within the range of -10 °C to 55 °C (14 °F to 131 °F).

● Environmental humidity should be within the range of 10% to 90%.

Disconnect the power from the device before installing a hard disk drive (HDD). A factory

recommended HDD should be used for this installation.

Tools Required: Screwdriver.

Fix-on-bottom installation is applicable when you need to install and fix the HDD on the device

bottom.

Steps

1. Remove the cover from device by unfastening the screws on panels.

Figure 2-1 Remove Cover

2. Connect the data cable and power cable.