Garden Treasures 0880319 Montagehandleiding - Pagina 4
Blader online of download pdf Montagehandleiding voor {categorie_naam} Garden Treasures 0880319. Garden Treasures 0880319 13 pagina's. Lighted 3-tier fountain
Pagina afdrukken
ASSEMBLY INSTRUCTIONS
1. Place the big bowl with pump
(E) on the fountain base (F) and
turn clockwise to secure
together.
2. Run the cord from pump (J,
preassembled) through the tube
on the big bowl (E) to come out
from the bottom of fountain
base (F).
Make sure the preassembled
pump is set to the maximum
water flow position (indicated by
a plus sign "+").
3. Screw pipe (G) into mounting
bracket on pump (J).
4. Place big bowl spacer (D) on
the big bowl (E).
Run the two female plugs
coming from pump (J) through
the center of big bowl spacer
(D) as shown.
5. Connect the short female plug from
the pump (J) to the male plug found
on the middle bowl with light (C) and
screw the preassembled ring over the
cable to secure the connection.
Then place the middle bowl on the big
bowl spacer (D). Run the long female
plug from the pump through the
center of the middle bowl as shown.
1
2
3
4
5
4
6. Connect the long female
plug from the pump (J) to the
male plug found on the top
bowl with light (B) and screw
the preassembled ring over
the cable to secure the
connection. Then place the
top bowl on the middle bowl
(C) .
7. Secure the fountain with
rubber gasket (H) and top
(A).
8. Pour water gently into big
bowl (E), middle bowl (C)
and top bowl (B).
9. Plug the pump (J) into a
power supply.
10. OPTIONAL: To reduce
excess splashing and increase
flow time, a length of thread
(I) can be used to help direct
the water flow gently to the
bowl below. Cut a length of
thread (16 in. for top bowl, 24
in. for middle bowl) and place
each of the threads on
adjacent spouts as shown so
that the ends will hang down
into the bowl below.
6
7
8
9
10