KitchenAid KEBS245 Handleiding voor installatie-instructies - Pagina 4
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} KitchenAid KEBS245. KitchenAid KEBS245 6 pagina's. Electric built-in single & double ovens
Pagina afdrukken
UNPACKING
THE UNIT
Personal
Injury
Floor Damage
More than one person
is required
to lift or move
the oven because
of its weight
and size.
Failure to follow these instructions
may result in
Keep shipping
base under oven. Failure to do so
could cause damage to floor covering.
L
personal
injury.
The oven should
be left on the carton
base untrl it IS ready to put
Into the cabinet
It is also recommended
that the pads over the door(s)
be left in place.
These
precautions
will reduce
the possrbrllty
of
damage
to the front of the unit and the bottom
of the front frame.
Remove
all cords,
tape and wire used to hold various
parts
in
POSI-
tion during shipment.
Remove
oven racks from the inside of the oven
and put to one side while oven IS being
installed
In cabinet
Take
broiler
pan and grid from packing
on top of the oven and keep with
literature
packet
in a localion
where
they will be retalned
by the
owner.
To Remove
Oven
Racks
Slide
rack
forward
unl~l bar on back
of rack
touches
first slop
Lilt front of rack unl~l rear porllon
of rack slides
oul between
front
Iwo slops
ELECTRICAL
CONNECTION
Electrical
Shock Hazard
Disconnect
power supply
before making any electrical
connections.
Failure to do so may result in electrical
shock.
Connect
the conduit
from the oven to the junctron
box and properly
connect
to the power
supply
leads. (Bare to
ground,
black to L2, red to Ll, white to neutral
or according
to local code.)
GROUNDING
-THE
OVEN
MUST
BE GROUNDED
Do not work on the oven wiring
until the oven has beer; positively
grounded
The oven frame is grounded
through
the bare grounding
Lvlre
Connect
the whrte neutral
to the service
neutral
wire at the junction
box
INSTALLING
THE UNIT
IN CABINET
Potential
Personal
Injury
- Use both hands to remove oven doors.
- Grasp only the sides of the oven door.
Do
Not
use
any portion
of the front frame
or trim
for
lifting.
Failure
to properly
grasp
oven
door
could
result
in damage
to product
or personal
injury.
The doors
should
be remoded
to
decrease
the
weight
of the
oven
and
provide
a better
hand-hold
on
the
oven
wrile
lifting
It into the cabinet.