Garden Wood Furniture Somerset 961W2 Montagehandleiding - Pagina 4

Blader online of download pdf Montagehandleiding voor {categorie_naam} Garden Wood Furniture Somerset 961W2. Garden Wood Furniture Somerset 961W2 10 pagina's. Glider 44

Pagina afdrukken

3) Glue 10x40mm Wood Dowels (C) in the two outer holes in the three-hole groups in the Left

and Right Glider Leg Assemblies (7&8). Attach the Glider Leg Supports (9) to the Left Glider

Leg Assembly (7) with Dowels (C) and 7x70mm Hex Screws (A). Attach the Right Glider Leg

Assembly in the same way. The front leg support will not touch the ground. This is to allow for

any unevenness of the ground between the legs.

x16

4) The Rocker Arms (I) are not straight, but are slightly bent so that the attachment holes on

each end will be flush against the glider legs and bench legs. Insert a 6.5x50mm Hex Bolt (E)

through a Washer (F) and the hole in the front lower corner of the Left Leg, another Washer,

and onto a Rocker Arm (I). Attach a Hex Nut (G)and tighten. Repeat for the right front leg and

do the back legs.

Insert a 6.5x50mm Hex Bolt (E) through a Washer (F), the hole in the left front glider leg,

another washer and the Rocker Arm. Attach Hex Nut (G) and tighten. Repeat for the other

rocker arms.

BACK

FRONT

FIG. 3

FIG. 4

961W2 – Page 4