Lexmark C746 Handleiding voor afdrukken - Pagina 3

Blader online of download pdf Handleiding voor afdrukken voor {categorie_naam} Lexmark C746. Lexmark C746 4 pagina's. Setup sheet
Ook voor Lexmark C746: Technische opmerking (3 pagina's), Handmatig (14 pagina's), Handleiding kleurkwaliteit (6 pagina's), Aansluithandleiding (5 pagina's), Papieren handleiding (4 pagina's), Menu Kaart (3 pagina's), Handmatig (2 pagina's), Gebruiksaanwijzing (2 pagina's), Informatie handleiding (1 pagina's), Setupblad (2 pagina's)

Pagina afdrukken
Lexmark C746 Handleiding voor afdrukken
5
Load the paper stack with the recommended printable side faceup.
Notes:
•
When loading preprinted letterhead for one‑sided printing, place the header faceup toward the front of the tray.
•
When loading preprinted letterhead for two‑sided printing, place the header facedown toward the rear of the tray.
One‑sided printing
Note: Make sure paper does not exceed the maximum fill indicator located on the left side of the tray.
Warning—Potential Damage: Overloading the tray can cause paper jams and possible printer damage.
6
Insert the tray.
Note: For some paper sizes, the tray will extend past the back of the printer.
7
From the printer control panel, verify the paper size and paper type setting for the tray based on the paper you loaded.
Note: Paper jams may occur if the paper size and type settings selected do not match the paper loaded.
Two‑sided printing
Printing guide
Page 3 of 4