Gardena PowerMax 1600/37 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gardena PowerMax 1600/37. Gardena PowerMax 1600/37 15 pagina's. Electric lawnmower
Ook voor Gardena PowerMax 1600/37: Gebruikershandleiding (10 pagina's), Gebruikershandleiding (15 pagina's)
5. STORAGE
To put into storage:
g
Disposal:
(in accordance with
RL2012/19/EC)
6. TROUBLESHOOTING
To replace the blade:
Problem
Mower does not start
Engine is jammed and
makes a noise
18
The product must be stored away from children.
1. Disconnect the product from the mains.
2. Clean the mower (see 4. MAINTENANCE).
3. To save space, loosen the lockings
folded easily.
Make sure that the cable is not locked between the handle and
the mower.
4. Store the mower in a dry, enclosed and frost-free place.
The product must not be disposed of to normal household waste.
It must be disposed of in line with local environmental regulations.
IMPORTANT!
Dispose of the product through or via your municipal recycling
collection centre.
DANGER! Risk of injury!
Cut injury when the mower starts accidentally.
v Wait for the blade to stop, disconnect the mower from the
mains and use gloves before you troubleshoot the mower.
DANGER! Risk of injury!
Cut injury when the blade turns and it is damaged,
bent, out of balance or has chipped edges.
v Do not use the mower when the blade is damaged, bent,
out of balance or has chipped edges.
v Do not regrind the blade.
The GARDENA spare parts are available from your GARDENA dealer
or from the GARDENA service.
Only use an original GARDENA blade:
• For PowerMax 1600/37: GARDENA replacement blade
Art. 4016.
• For PowerMax 1800/42: GARDENA replacement blade
Art. 4017.
v Let the blade be replaced by the GARDENA Service or a specialist
dealer authorised by GARDENA.
Possible Cause
Extension cable is disconnected
or damaged.
Blade is blocked.
Blade is blocked.
Cutting height is too low.
g
until the handle can be
Remedy
v Connect the extension cable
or if necessary replace it.
v Remove the obstacle.
v Remove the obstacle.
v Raise the cutting height.