Avaya H219 Handmatig - Pagina 15

Blader online of download pdf Handmatig voor {categorie_naam} Avaya H219. Avaya H219 19 pagina's. Installing and administering

2. Do one of the following:

• To delete a specific memory, press DELETE.

The programmer displays DELETE?.

• To delete all memory locations, press DELETE until the programmer displays DELETE

ALL?.

3. To delete the specific or all memory locations, press DELETE.

4. To exit, press PROG.

Transferring stored numbers in the phone

Before you begin

Ensure that the Avaya H219 analog phone to be programmed is not connected to the telephone

line before connecting it to the memory programmer.

Procedure

1. Connect one end of the cable to socket J1 of the memory programmer and the other end

to socket J6 of the phone.

Socket J6 is located under the faceplate.

The programmer displays CONNECTED.

2. To upload the stored number in the telephone, press UPLOAD.

The programmer displays UPLOADING. If the uploading is successful, the programmer

displays OK. If the uploading fails, the programmer displays ERROR!.

3. Disconnect the cable from the phone.

You can use Feature Access Codes (FAC) to provide users with quick access to certain features

of the phone. Avaya H219 analog phone programmable buttons are programmed with default

feature access codes. You can configure Avaya Aura

access the functions. You can also assign functions to the Avaya H219 analog phone

programmable buttons or voice mail button using the Avaya H200 Programmer.

The following table lists the default FAC corresponding to the programmable buttons on Avaya

H219 analog phones:

January 2020

Installing and Administering the Avaya H209 and H219 Phones

Comments on this document? [email protected]

Transferring stored numbers in the phone

or IP Office to use these default FAC to