KitchenAid KOSP 6610 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} KitchenAid KOSP 6610. KitchenAid KOSP 6610 16 pagina's.

Installing the built-in / under the counter column oven

Electrical connection

Regulations require that the apparatus be earthed.

• The electrical connection must be made by a qualified electrician

following the instructions provided by the manufacturer and

incompliance with local safety standards in force.

• The installer is responsible for ensuring that the electrical

connection of the appliance is carried out properly and

incompliance with local safety standards in force.

• The oven power cable must be long enough to connect the built-

in appliance to the mains.

• Observance of safety directives requires that a multi pole switch

with a minimum contact gap of 3 mm be used for the installation.

• Never use adapters or extension leads.

• Once the installation is complete, the electrical parts should no

longer be accessible.

Connecting to the oven

• Make sure that the voltage indicated on the rating plate is the

same as the mains voltage. The rating plate is on the front edge of

the oven (visible when the door is open).

• Replacement of the supply cable (see table) should only be carried

by an authorised customer service centre representative.

Power supply cable table

No. of conductors

IN+

Securing the oven

• Lift the oven using the handles on each side (B) and insert it in the

unit, ensure that the power cable is not trapped (Fig. 8).

• Centre the oven in the housing unit before finally securing it.

• Secure the oven into the unit using the screws provided (as shown

in Fig. 9).

Type of cable

H05 RR-F 3 X 1,5 mm

(continuation)

Fig. 7

Fig. 8

Fig. 9