Gardena 1740 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gardena 1740. Gardena 1740 14 pagina's. Rain water tank pump
Ook voor Gardena 1740: Gebruiksaanwijzing (9 pagina's)

Pagina afdrukken

1. Assembly

Automatic mode:

Dry-Running Safety:

Leakage protection:

5. Storage

To put into storage:

Disposal:

(in accordance with

RL 2012/19/EU)

Adjusting the Cut-in and Cut-out Height:

The maximum cut-in height and minimum cut-out height

(see 8. Technical Data) can be adjusted by pushing the float

switch wire into the float switch lock.

v Press the cable of the float switch

the float switch lock

In order to ensure that the float switch is able to switch on and off,

the cable length between the float switch and the float switch lock

must be at least 10 cm.

4000/2 automatic (Art. No. 1742):

The pump automatically switches off as soon as no more water is

retrieved. Due to the non-return valve, the pressure is maintained

in the hose until water is drawn via the hose. When water is drawn

via the hose (the pressure in the hose falls below approx. 1.3 bar),

the pump switches on automatically.

When there is no liquid to pump, the pump automatically switches

off. The pump then switches in the cycle on 30 sec. – 5 sec.

off (4 x). In 1 hr., 5 hrs., 24 hrs., 24 hrs.... this cycle is repeated.

As soon as the pump stands in at least 4.5 cm water, the pump

is ready for operation again.

If there is leakage on the pressure side (e. g. a leaking pressure

hose or connecting device), the pump automatically switches on

and off in short intervals. When the pump switches on and off

more frequently than 7 x in 2 min. (with a leakage less than 90 l/h),

the pump switches completely off. When the leakage on the

pressure side is eliminated, the pump must be unplugged and

plugged in again in order to be operational again.

The storage location must not be accessible to children.

The pump must be protected against frost.

1. Unscrew the telescopic lance

and empty the pump (turn the

pump upside down).

2. Store the pump in a dry, frost-

proof location.

Transport position:

1. Unscrew telescopic pipe

attach to the side of pump.

Here, ensure that the nose

slid into the slot

2. Wind mains cable

cable holder

connector

In the transport position, the pump can be carried by the

telescopic pipe

push up the slide bar

The product must not be added to normal household waste.

It must be disposed of in line with local environmental regulations.

and

around the

and the pump

. For easier winding of the mains cable

of the cable holder

into an opening in