KitchenAid KHMS 9010/I Gebruiksaanwijzing - Pagina 4
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} KitchenAid KHMS 9010/I. KitchenAid KHMS 9010/I 20 pagina's.
Ook voor KitchenAid KHMS 9010/I: (Frans) Manuel (12 pagina's)
Pagina afdrukken
Product description and symbols
1. Removable pan supports
2. Professional double crown Wok burners
3. 145 mm diameter induction zone
4. Left gas burner control knob
5. Central gas burner control knob
6. Right gas burner control knob
7. Display and touch control panel for the induction zones
Gas burner control knob symbols
A. Burner position indicator
B. Flame regulation symbols
- Off
- Maximum external and internal crown flame
- Minimum external crown flame.
Maximum internal crown flame.
- External crown flame off.
Maximum internal crown flame.
- External crown flame off.
Minimum internal crown flame.
Gas burner functions
This hob is fitted with three professional gas
double crown wok burners, which means that the
gas burners are extremely flexible. Flexible enough
to allow cooking at extremely high temperatures
whilst also allowing cooking over a very low heat
thanks to the central crown.
Even when the induction part is not on, the
gas burners will work anyway.
Turning the gas burners on
- Push in the corresponding control knob to turn
on one of the burners and rotate it anti-
clockwise until the indicator on the control
knob is lined up with the maximum flame
symbol
.
Important: If you just want to use the internal crown burner, turn the control knob until the
indicator is lined up with
crown burner automatically switches off. When you wish to turn the gas burner off, just turn
the control knob until the indicator points to the
, then press the control knob into the control panel. The external
4
B
A
- Press the control knob against the control panel
to turn on the relevant burner. Once the burner
is lit, keep the control knob pushed in for about
5 seconds to allow the safety thermocouple
fitted to each gas burner to heat up. Then
release the control knob. The thermocouple is
a safety device that will shut off the gas supply
should the flame accidentally go out ( a gust of
air, momentary lack of gas supply, liquid spillage,
etc).
- The control knob should not be pushed in
for more than about 15 seconds. If the gas
burner has not ignited within this time,
return the control knob to the off position,
wait at least a minute before trying again.
.