Avaya J179 Beknopte handleiding - Pagina 5

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Avaya J179. Avaya J179 6 pagina's. Sip phone
Ook voor Avaya J179: Snelle referentie (5 pagina's), Referentiehandleiding voor eindgebruikers (11 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentie (5 pagina's), Snelle referentie (3 pagina's), Snelle referentie (3 pagina's), Snelle referentie (6 pagina's), Snelle referentie (6 pagina's), Gebruiksaanwijzing (7 pagina's), Snelle gebruikershandleiding (2 pagina's), Handmatig (13 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (2 pagina's), Snelle referentiehandleiding (4 pagina's), Snelle referentiehandleiding (9 pagina's), Snelle referentie (7 pagina's)

Instructions

To connect the Avaya J169/J179 IP Phone to the Avaya Cloud Office, you must first

connect the device to the network and power it up.

1. If your router has PoE port available, connect the J169/J179 ethernet port to your

router. The power adapter is not required in this case. The device bootup will start.

2. If your router does not have PoE port available, connect the J169/J179 ethernet

port to the available port on your router. Connect the power adapter to the

J169/J179. The device bootup will start.

ROUTER - SWITCH

PoE

ROUTER - SWITCH

3. Once the device is boots up, it will obtain an IP address from your network.

4. Once connected to the network, the device will automatically connect to ACO,

and login.

5. The device may reboot if there is new software that needs to be installed.

The latest software for ACO must always be installed on the device in order for it

to connect to ACO and provide service.

6. Once the device has network connectivity, allow any upgrades to be completed

successfully before attempting to use the phone.

If you are connecting the Avaya J179 IP Phone to the network, via the optionally

provided WiFi module:

1. Install the WiFi module in the module panel using the instructions provided with

the WiFi module.

2. Connect the power adapter to the J179.

3. Continue from Step 3 above.

ROUTER - SWIT