Lexmark E260 Series Snelle referentie - Pagina 7

Blader online of download pdf Snelle referentie voor {categorie_naam} Lexmark E260 Series. Lexmark E260 Series 10 pagina's. Toner cartridge
Ook voor Lexmark E260 Series: Brochure & specificaties (4 pagina's), Setupblad (2 pagina's), Onderhoudshandleiding (11 pagina's), Servicehandleiding (5 pagina's), Gebruiksaanwijzing (12 pagina's), Onderhoudshandleiding (11 pagina's)

Try one of the following:

•

Remove Tray 1.

•

Open the front door, and then remove the photoconductor kit

and toner cartridge unit.

•

Remove Tray 2.

251.yy Paper jam

- On

Remove the jam from the manual feeder.

Clearing jams behind the

photoconductor kit and toner

cartridge

Push the release button, and then lower the front door.

Lift and pull the unit containing the photoconductor kit and

the toner cartridge out of the printer. Set the unit aside on a

flat, clean surface.

Warning—Potential Damage: Do not touch the

photoconductor on the underside of the photoconductor kit.

Use the cartridge handle whenever you are holding the

cartridge.

Clearing jams

CAUTION—HOT SURFACE: The inside of the printer

might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching.

Remove the jammed paper.

Note: If the paper is not easy to remove, then open the rear

door to remove the paper.

Align and reinstall the unit.

Close the front door.

Press

to continue printing.

Clearing jams from the

standard exit bin

A duplex print job was sent to the printer using a paper size not

supported for duplex printing. A sheet is jammed in the standard

exit bin.