Lexmark E360D series (Duits) Aanvullend handboek - Pagina 2

Blader online of download pdf (Duits) Aanvullend handboek voor {categorie_naam} Lexmark E360D series. Lexmark E360D series 9 pagina's. Loading paper
Ook voor Lexmark E360D series: Installatie en installatie (2 pagina's), Brochure & specificaties (4 pagina's), Brochure & specificaties (4 pagina's), Snelle referentie (2 pagina's), Aanvullende handleiding (5 pagina's), Handleiding voor probleemoplossing (8 pagina's)

Notes:

•

Notice the size indicators on the bottom of the tray. Use

these indicators to help position the guide.

•

For setup, load letter- or A4-size paper based on the

standard size for your country or region.

Flex the sheets back and forth to loosen them, and then fan

them. Do not fold or crease the paper. Straighten the edges on

a level surface.

Load the paper stack toward the back of the tray as shown with

the recommended print side facedown.

Note: Notice the maximum fill line on the side of the width

guide which indicates the maximum height for loading paper.

Do not try to overload the tray. Do not load A6 paper to the

maximum fill line; the tray only holds 150 sheets of A6 paper.

Maximum fill line

When loading letterhead, place the top edge of the sheet

toward the front of the tray. Load the letterhead with the

design placed facedown.

Squeeze the width guide tabs on the right guide, and slide the

width guides to lightly touch the side of the stack.

Insert the tray.

If a different type of paper was loaded than the type previously

loaded in the tray, change the Paper Type setting for the tray

from the printer control panel. For more information, see

"Setting the Paper Size and Paper Type" on page 5.

Note: The difference between the standard 250-sheet tray and the

optional 250- and 550-sheet trays is that the standard tray

accommodates A6-size paper, so the width guides slide farther to

the center of the tray. You also need to adjust the length guide

specifically created for A6.