Lexmark E360DN - Hv Taa/gov Compliant Aanvullende handleiding - Pagina 4
Blader online of download pdf Aanvullende handleiding voor {categorie_naam} Lexmark E360DN - Hv Taa/gov Compliant. Lexmark E360DN - Hv Taa/gov Compliant 5 pagina's. Troubleshooting guide
Ook voor Lexmark E360DN - Hv Taa/gov Compliant: Installatie en installatie (2 pagina's), Handleiding voor probleemoplossing (8 pagina's)
Pagina afdrukken
231 paper jam
CAUTION—HOT SURFACE: The fuser and the inside of the
printer near the fuser may be hot. To reduce the risk of injury
from a hot component, allow the surface to cool before
removing paper from this area.
1
Open the front door.
2
Open the rear door.
3
Remove the jam.
4
Close the rear door.
5
Close the front door.
6
Press
.
233 paper jam
1
Remove the tray from the printer.
2
Locate the lever shown. Pull the level down to release the jam.
4
3
Pull the jammed sheets from the duplex area.
4
Insert the tray.
5
Press
.
If this does not clear the jam, complete the steps in "231 paper
jam" on page 4.
234 paper jam
A single jam or multiple jams are in the duplex area of the printer
when the printer is turned on. To locate and remove the jammed
sheets, complete all the steps in:
•
"231 paper jam" on page 4
•
"233 paper jam" on page 4