Gardena ComfortCut Plus 500/27 Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gardena ComfortCut Plus 500/27. Gardena ComfortCut Plus 500/27 16 pagina's. Turbotrimmer
Ook voor Gardena ComfortCut Plus 500/27: Gebruiksaanwijzing (16 pagina's), Gebruiksaanwijzing (16 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruikershandleiding (9 pagina's)
Pagina afdrukken
u
8
Setting the trimmer to
body height:
2
1
w
i
Adjusting the plant guard:
16
Working position 3:
The upright must be in the uppermost position in working
position 3.
1. Turn plant guard
8
it engages.
2. Press the foot pedal
uppermost position.
3. Press the button
u
until it engages.
4. With the impeller, move the trimmer along the lawn edge.
CAUTION! The trimmer may only be used provided that the
trimmer head is engaged at an angle of 0° or 90°.
Setting the shaft length:
v Loosen the clamping sleeve
desired shaft length and re-tighten the threaded collar
The clamping sleeve
i
prevent the shaft from being moved.
Setting the additional handle:
v Pull the lock
belonging to the additional handle
1
additional handle
2
If the trimmer is correctly set to the body height, the posture
is upright and the trimmer head in working position 1 is tilted
forwards slightly.
v Hold the trimmer by the handle
such a manner that the trimmer head is tilted forwards slightly.
8
Working position
v Turn plant guard
8
until it locks into place.
through 90° into the Parking position until
and move the upright into the
z
and rotate the trimmer head from 0° to 90°
, extend the handle
i
must be fastened firmly enough to
to the desired incline and release the lock
and additional handle
w
8
Parking position
through 90° into the required position
to the
w
.
i
, set the
2
.
1
in
2