Gardena SmallCut 23/18V P4A Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gardena SmallCut 23/18V P4A. Gardena SmallCut 23/18V P4A 11 pagina's. Battery trimmer

Pagina afdrukken

Protect the battery against heat, e. g. against continuous intense

sunlight, fire, dirt, water and moisture.

There is a risk of explosion and short-circuiting.

v Only operate and store the battery at an ambient temperature between

– 20 °C and + 50 °C. Do not leave the battery in your car in the summer, for exam-

ple. At temperatures of < 0 °C some devices may experience a loss of power.

v Only charge the battery at an ambient temperature which is between

0 °C and + 45 °C. Charging outside of this temperature range can increase the

risk of damage to the battery and pose a fire hazard.

v After use, allow the battery to cool down for at least 30 minutes before

charging or storing.

Electrical safety

DANGER! Cardiac arrest!

This product makes an electromagnetic field while it operates. This field

may under some conditions interfere with active or passive medical

implants. To decrease the risk of conditions that can possibly injure or

kill, we recommend persons with medical implants to speak with their

physician and the medical implant manufacturer before you operate the

product.

Keep the external mains cable in visible area. Check the area of hidden cables

before cutting.

Only use the battery product between 0 °C to 40 °C.

Disconnect the battery in case of emergency.

Do not use the product nearby a water, or for pond care.

Protect the battery contacts from moisture.

Personal safety

DANGER! Risk of suffocation!

Small parts can be easily swallowed. There is also a risk that the poly-

bag can suffocate toddlers. Keep toddlers away when you assemble the

product.

Finger entrapment: Watch out for your fingers while assembling the protective cover.

If the trimmer vibrates heavily, replace the blade and check the blade holder for

damage.

Check the wear rib if ok before usage.

Use the front handle to transport the trimmer.

Use personal protective equipment.

Wear gloves for cleaning the cutting device.

Always wear eye protection.

Protective equipment such as gloves, non-skid safety shoes, or hearing protection

used for appropriate conditions will reduce personal injuries.

Be careful during adjustment of the product to prevent entrapment of the fingers

between moving and fixed parts of the machine, or while assembling the protec-

tive cover.

Don't use water, or chemical substances for cleaning the guard or other parts of

the trimmer.

Keep all nuts, bolts and screws tight to be sure the product is in a safe working

condition.

Do not disassemble the product further than the delivery status.

Warning! When wearing hearing protection, and due to the noise produced by the

product, the operator may not notice persons approaching.

While operation and transport pay special attention to the hazard for other people.

Stay alert, watch what you are doing and use common sense when operating

a power tool.

Do not use a power tool while you are tired or under the influence of drugs,

alcohol or medication.

A moment of inattention while operating power tools may result in serious per-

sonal injury.

2. ASSEMBLY

DANGER! Risk of physical injury!

Cut injury when the product starts accidentally.

v Wait for the plastic blades to stop and remove the battery

before you assemble the product.

To assemble the additional handle [ Fig. A1 ]:

(1)

v Slide the additional handle

audibly engages (click).

To assemble the protective cover [ Fig. A2 / A3 ]:

DANGER!

The product may only be used when the protective cover is

assembled.

(2)

on the top part of the handle

until it

1. Put the protective cover

(4)

to the trimmer head

plastic blade

(3)

through the opening in the protective cover

2. Rotate the protective cover

(4)

(the arrows

face each other).

(4)

3. Rotate the protective cover

audibly engages. (click).

To attach the plastic blade to handle [ Fig. A4 ]:

The scope of delivery includes 5 plastic blades

plastic blades in the openings

(6)

For the assembly of the plastic blade into the blade holder,

see 6. TROUBLESHOOTING To replace the plastic blade.

3. OPERATION

DANGER! Risk of physical injury!

Cut injury when the product starts accidentally.

v Wait for the plastic blade to stop and remove the battery

before you transport the product.

To charge the battery [ Fig. O1 / O2 / O3 ]:

CAUTION!

Note the mains voltage! The voltage of the power source must

match the voltage specified on the rating plate of the charger.

For the GARDENA Battery Trimmer Art. 14702-55 there is no

battery and no charger in the scope of delivery.

Thanks to the intelligent charging process, the charge condition of the

battery is automatically detected and then charged up with the optimal

charge current depending on battery temperature and voltage.

In this way, the battery is treated with care and remains permanently fully

charged when it is stored in the charger.

(A)

1. Push the locking button

and remove the battery

holder

(D)

(C)

2. Connect the battery charger

3. Slide the battery charger

(C)

onto the battery

When the battery charge indicator

the battery is being charged.

When the battery charge indicator

permanently green the battery is completely charged

(Charging time, see 7. TECHNICAL DATA).

4. Examine the charge status regularly while you charge.

5. When the battery

(B)

is completely charged, you can disconnect the

(B)

(C)

battery

from the charger

Meaning of the indication elements:

Indication on the charger [ Fig. O3 ]:

Flashing of the Battery

The charging procedure is indicated by flashing of the battery charge

Charge Indicator

(Lc)

indicator

Note: The charging procedure is only possible when the battery

temperature is within the allowable charging temperature range,

see 7. TECHNICAL DATA.

Continuous Lighting

Continuous lighting of the battery charge indicator

of the Battery

the battery is fully charged or that the temperature of the battery is

(Lc)

Charge Indicator

not within the allowable charging temperature range and can therefore

not be charged.

When the battery is not inserted, continuous lighting of the battery

(Lc)

charge indicator

socket outlet and that the battery charger is ready for operation.

Battery charge status indication

[ Fig. O4 / O6 ]:

After starting the product, the battery charge status indication

is displayed for 5 seconds.

(5)

while you feed the

(4)

until it can be completely pushed on

anti-clockwise until the connection

(3)

. There are 4 spare

on the handle.

(B)

from the battery

into a mains socket.

(B)

(Lc)

at the charger flashes green

(Lc)

at the charger illuminates

(Lc)

indicates that

indicates that the mains plug is inserted in the

(P)

on the product

(P)