Gardena String Trimmer 1000 Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gardena String Trimmer 1000. Gardena String Trimmer 1000 13 pagina's. Grass trimmer
Pagina afdrukken
GARDENA String Trimmer 1000
1. Technical data
Power consumption
Mains voltage
Frequency
String strength
Cutting width
String supply
Weight
Rpm of filament cassette
IP-protector
Moisture resistance
Working area related emission
characteristic value L
2)
Noise level L
WA
Hand-arm vibrations a
Measuring method according to 1) EN 786 2) Directive 2000 / 14 / EC
2. Information regarding the operating instructions
Please read and follow these
operating instructions carefully.
Familiarise yourself with the unit's
features, the controls, its proper
use and the safety instructions
included.
3. Proper use
The GARDENA String Trimmer
has been designed for trimming
uncultivated areas, thick weeds
and tall grass in and around the
garden.
This trimmer is for private use
only and is not designed for use
4. Assembly
(ill. A)
Before beginning work, fix
and adjust the enclosed safety
B
cover
as well as the additional
7
handle
and the shoulder strap
6
as follows:
Insert the safety cover
groove of the cutting head support
C
to the end stop according to
ill. A / A 1. Listen for an audible
snap-in.
12
1,000 W
230 V
50 Hz
2 mm
330 mm
2 x 3 m
approx. 4.5 kg
max. 12,000 rpm
II
covered
1)
83 dB (A)
pA
measured 94 dB (A) / guaranteed 96 dB (A)
1)
< 2.5 ms
vhw
For safety reasons chil-
A
dren under the age of 16
or people who are not familiar
with these operating instruc-
tions should not use this
String Trimmer.
in public places, parks, sport
arenas, street-scapes, in agricul-
ture or forestry.
It is essential to observe the
manufacturer's operating instruc-
tions to ensure the unit's proper
functioning. These instructions
Note: Check whether the cover
is properly seated by lifting.
If the safety cover is properly
fastened, it is non-detachable
from the cutting head support.
B
into the
Be careful with the cut-
A
ting blade / string limiter
0
, whilst assembling the
safety cover. Risk of injury!
- 2
on the handle / 3.3 ms
- 2
on the additional handle
Please keep these operating
instructions in a safe place.
also contain advice for service,
maintenance and repair.
Attention! For safety
A
reasons the unit must not
be used for hedge trimming
or for chopping up for com-
posting.
Loosen the screws on the addi-
7
tional handle
and adjust the
handle to the most appropiate
working position according to
ill. A /A 2. Then firmly tighten the
screws.
Adjust the length of the shoulder
6
strap
according to ill. A/A 3
to your size so that the String
Trimmer can be operated just
above the ground.
G