Lexmark J 110 Appletalk handleiding - Pagina 7

Blader online of download pdf Appletalk handleiding voor {categorie_naam} Lexmark J 110. Lexmark J 110 14 pagina's. Appletalk and marknet print servers
Ook voor Lexmark J 110: Snelle referentie (2 pagina's), Overzicht (1 pagina's)

Pagina afdrukken
Lexmark J 110 Appletalk handleiding
Printing
Print materials
Supplies

Troubleshooting

Administration
Troubleshooting
If you need additional help setting up the MarkNet print server to work with AppleTalk, try the
following resolutions.

Common solutions to network problems

1
Make sure the AppleTalk protocol is turned on (activated) in the print server. To find
out, print a network setup page and look under AppleTalk.
2
Make sure the status of the MarkNet print server is "connected". To find out, look on
the network setup page for Status.
3
Do you see the printer in the Chooser? If not, restart the Macintosh workstation and
look again.
Note: Be aware that if you're on a non-routed network, you can only see the printer if
your workstation connection (LocalTalk, Ethernet or Token-Ring) matches the
connection on the printer. For example, if the Macintosh workstation is on
LocalTalk, you cannot see a printer on Ethernet unless there is a router on the
network.
4
If you still don't see the printer in the Chooser, make sure AppleTalk is active on the
workstation (look in the AppleTalk control panel).
www.lexmark.com
AppleTalk and MarkNet print servers
Lexmark J110
7