Avaya 1616 Instellen - Pagina 2

Blader online of download pdf Instellen voor {categorie_naam} Avaya 1616. Avaya 1616 3 pagina's. Ip office essential h323 ip phone telquest tech support
Ook voor Avaya 1616: Gebruiksaanwijzing (1 pagina's), Gebruiksaanwijzing (2 pagina's), Handleiding voor eindgebruikers (20 pagina's), Gegevensblad (4 pagina's), Brochure (2 pagina's), Gebruikershandleiding (4 pagina's), Referentiehandleiding (4 pagina's), Snelle referentie (2 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentie (2 pagina's), Snelle referentie (2 pagina's)

Avaya 1616 Instellen
Page 2
The LCD will say:
Enter PROCPSWD:
#=OK (Note: Avaya changed this area on the newer 1616 phones, you may not need to dial 27238)
Dial 27238 and then press the # (POUND) button on the dial.
The LCD will say:
Phone=0.0.0.0
New=
Enter the IP Address you want the 1616 phone to use on the network that it is plugged into.
Press the # button when done...
The LCD will say:
CallSv=0.0.0.0
New=
Enter the IP Address of the IP Office telephone system. (KSU) OR
If this is a Non-VPN Remote Phone, then enter the Public IP Address that the KSU is connected to.
Press the # button when done...
The LCD will say:
Router=0.0.0.0
New=
Enter the IP Address of the Router/Gateway on the network that the 1616 phone is plugged into.
Press the # button when done...
The LCD will say:
Mask=0.0.0.0
New=
Enter the Subnet Mask of the LAN that the 1616 phone is plugged into.
Press the # button when done...
The LCD will say:
FileSv=0.0.0.0
New=
Enter the IP Address of the IP Office telephone system. (KSU) OR
If this is a Non-VPN Remote Phone, then enter the Public IP Address that the KSU is connected to.
Press the # button when done...
The LCD will say:
802.1Q=auto
*=change #=ok
Press the # button...