Gardena 1892 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gardena 1892. Gardena 1892 19 pagina's. Water control
Ook voor Gardena 1892: Gebruikershandleiding (18 pagina's), Gebruikershandleiding (19 pagina's)

Pagina afdrukken

– 0 dots for loamy soil

v Sensor response when soil is quite dry.

– 5 dots for sandy soil

v Sensor response when soil is very moist.

Soil Moisture Sensor, Art. 1188

(optionally available, Models up to 2020)

v (Fig. D and N):

1 Connect soil moisture sensor

After a soil moisture sensor is connected, the

"sensor activated / deactivated" display will appear –

this can take up to 1 minute. Select an option to

activate/deactivate the sensor response. Use the

switching point controller on the soil moisture sen-

sor to set the level of soil moisture that must be

achieved before the sensor responds (see Opera-

tor's Manual for GARDENA Soil moisture sensor).

GARDENA Automatic Water Distributor,

Art. 1197 (optionally available)

v (Fig. O):

1 Menu: Water Distributor automatic

This menu allows you to control up to

6 water lines with the Automatic Water Distributor.

This includes a necessary minimum pause of

5 minutes between the outlets and a minimum

watering duration of 30 seconds (display: 1 min).

This time ensures reliable switch-over to the next

outlet and makes sure that the schedules and

outlets are correctly linked (for details of the com-

missioning process, see the Operating Instructions

for the Water Distributor).

2 Select amount of active water lines

You can select any number between 2 and 6.

Seal any outlets on the Water Distributor that you

do not need with end caps and move the setting

lever to the "OFF" position.

3 Create schedules 1 ‒ 6

When prompted to do so, enter watering schedules

L1 – L6 on the display. For this, use the standard

method for entering schedules based on the start

time, duration and frequency.

Note: Schedules are not allowed to overlap. If you

enter a schedule that overlaps with the next one,

the start time of the next watering operation will

be postponed and a pause of 5 minutes will be

inserted between the operations. Changes to the

schedules can be made in the "Water Distributor"

menu.

• Start times: Define the start times for the water

lines in chronological order. This makes it easier to

calculate and suggest the next possible start time.

• Duration: The total watering duration for all outlets

– including the necessary pauses – must not

exceed 24 hours.

• Frequency: Different weekdays can be selected.

Note: To ensure correct switch-over and correct

linking of the schedules and outlets, any outlets

that are not scheduled to operate on a particular

day will still be activated for a period of 30 sec-

onds on the day concerned.