Gardena EVC 1000 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gardena EVC 1000. Gardena EVC 1000 12 pagina's. Electric aerator
Ook voor Gardena EVC 1000: Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruiksaanwijzing (14 pagina's), Gebruikershandleiding (9 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruikershandleiding (9 pagina's), Gebruiksaanwijzing (14 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruikershandleiding (10 pagina's)

Pagina afdrukken

Interruptions of work :

Never leave the Electric Aerator unatten-

ded at the working area.

v If you interrupt your work store the unit in a

safe place. Disconnect the mains plug !

v When you interrupt work in order to go to

another working area, always switch off the

Electric Aerator during transport. Put the

wear compensation lever in the transport

position.

3. Function

Correct aerating :

4. Assembly

Assembling the handle :

If you come into contact with an

obstruction during aerating :

1. Turn off the Electric Aerator.

2. Remove the obstruction.

3. Check the Aerator for damage and have

it repaired if necessary.

The Aerator can be used for removing matting and moss in the

lawn as well as for cutting flat-rooting ranks.

To maintain a well-cared-for lawn, we recommend aerating the

lawn twice a year: in the spring and in the autumn.

v First of all, mow your lawn to the length you require.

We particularly recommend this if the grass has grown tall

(e.g. while you were away on holiday).

Recommendation: the shorter you mow your lawn, the easier

it is to aerate, thus lessening the strain on the Aerator and

increasing the lifetime of the aerator cylinder.

Remaining in one spot too long, or aerating if the ground is wet

or too dry can damage the grass.

v For good results, guide the Aerator at an appropriate speed in

strips as straight as possible across your lawn.

To avoid leaving any gaps during aerating, the strips should touch.

v Always guide the Aerator at an even speed depending on the

type of ground.

v When working on inclines always stand diagonally to the incline

in a sturdy, safe stance. Do not work on extremely steep slopes.

Danger of tripping !

To prevent tripping take particular care when moving back-

wards and when pulling the Aerator.

When aerating areas of very mossy lawn we recommend resowing

the lawn after aerating. This helps the areas of lawn which were

replaced by moss to regenerate more quickly.

V Do not place the connecting cable

during assembly.

1. Insert the two lower sections of the upright

the round hole) in the mountings in the motor casing

secure with the crosshead screws

under strain

(with the end with

and