Gardena GH 2000 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gardena GH 2000. Gardena GH 2000 10 pagina's. Garden shredder

Pagina afdrukken

Removing Blockages :

Shredding tips :

5. Maintenance

Cleaning the

Shredder :

6. Trouble-shooting

1. Press the red OFF switch

2. Turn the knob

released.

3. Lift up the housing cover

The housing cover is help up by a rod.

4. Remove the objects blocking the shredder and clean the inside

of the housing if necessary.

5. Check the blade disk and blades for damage and install new

parts if necessary (see 6. Troubleshooting "Exchanging the

Blades" ).

6. Close the housing cover

7. After the cooling-down time has elapsed (approx. 5 minutes),

press the green ON switch

Alternate shredding fresh, soft cuttings with dry branches.

The suitability of the shredder for cutting garden waste which is

soft and contains large amounts of sap (e.g. pomaceous fruit, wet

plant waste) is limited. This material should be composted straight

away.

When shredding thick branches, only apply slight pressure to

prevent blocking the shredder.

Danger ! Risk of injury !

V When carrying out maintenance work, always switch

off the motor, wait for the cutting blades to stop moving,

unplug the mains plug, and wear protective gloves.

V To avoid injury to persons and property, never clean

your shredder under running water, in particular not

with water under high pressure.

Always keep the ventilation slits

1. Remove dirt and shredded material using a soft brush or cloth

straight away after you have finished shredding.

2. Spray the cutting blades with a bio-degradable oil (water hazard

class 0) to protect them against corrosion.

Danger ! Risk of injury !

V When carrying out maintenance work, always switch

off the motor, wait for the cutting blades to stop moving,

unplug the mains plug, and wear protective gloves.

Blunt blades overload the motor and diminish the shredding

results.

and unplug the mains plug.

anticlockwise until the housing cover

and secure by tightening the knob

free of dirt.