Gardena Profi C 1060 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gardena Profi C 1060. Gardena Profi C 1060 18 pagina's. Water computer
Ook voor Gardena Profi C 1060: Gebruiksaanwijzing (16 pagina's)

Pagina afdrukken

The pre-programming takes into consideration the 30 minute

break required between the programs as well as a minimum

watering time of 30 seconds (display:

This watering time is required to allow the Automatic Water

Distributor to switch to the next outlet and to ensure that the

order of the watering programs to the appropriate watering

line is retained.

The watering days entered for the watering program are valid

for all other watering programs.

Error message (

E E R R R R O O R R

)

You can alter the watering starting times and watering times

pre-programmed by the Water Computer to meet your personal

requirements. However, if you do not take into account the break

times mentioned above, any changes you make are not accepted

and an error message appears on the display (

Since it is very easy for watering times to overlap slightly, espe-

cially when the beginnings and ends of programs are very close

together, it is sensible to RESET the Water Computer and to

re-enter the watering data to prevent an error message appearing.

On / Off Prog.

If the watering programs are switched off after you have con-

firmed the special function (status indicator on Off Prog.) all the

programs which begin in this time are shortened to the minimum

watering time of 30 seconds (display:

the order of the watering programs to the appropriate outlet of

the Automatic Water Distributor is retained.

1 1

min.).

E E R R R R O O R R

1 1

min.) This ensures that

By briefly opening the water flow the outlets on the Automatic

Water Distributor are switched further so that when the watering

programs are reactivated

outlets for the required watering program is retained.

Soil Moisture Sensor /

When using the Water Computer C 1060 prof together

Rain Sensor

with the Automatic Water Distributor, Soil Moisture Sensor

(Art. No. 1187) or Rain Sensor electronic (Art. No. 1189)

please note the following :

If the special function is activated and the Soil Moisture or

Rain Sensor indicates sufficient moisture, watering is interrupted.

The watering time of following watering programs is shortened

to 30 seconds (display:

Sensor allows the watering programs to be resumed. The water-

ing time originally entered then begins.

Shortening the watering time when the soil is sufficiently moist

ensures that the automatic water distributor is switched to the

next outlet and therefore ensures that the correct order of the

watering program for the respective distributor outlet is retained.

(% Run-Time) the original order of the

1 1

min.) until the Soil Moisture / Rain