Avaya BCM50 Configuratiehandleiding - Pagina 11

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Avaya BCM50. Avaya BCM50 14 pagina's. Business communication manager for skype sip connect service
Ook voor Avaya BCM50: Technische configuratiehandleiding (18 pagina's)

Avaya BCM50 Configuratiehandleiding
15. Configure a destination code to route dialed digits by clicking on the Add button. Digits that
begin with this destination code will be presented to the SIP trunking component on the BCM for
routing towards the Service Provider.
16. In the Add Destination Code dialog box, enter a numeric number for the destination code and
click on the OK button.
17. Select the row representing the Destination Code entered in the previous step
18. Under Normal Route column, double click and enter the route entered in Step 7.
Under the Absorbed Length column, specify the number of digits that will be absorbed before
19.
pre-pending the configured External number configured in Step 10 and sending the rest of the
digits to the SIP trunking component.
20. While the row representing the Destination Code enter in Step 16 is selected, in the Alternate
Routes table that shows up below, click on an unused schedule
21. In the Second Route column of the selected row above, provide the route configure in Step 13.
22. Navigate to Configuration
23. Click on the schedule used in Step 20 above.
24. Define the times when this schedule will be active by providing the start and stop times for each
day of the week.
25. In the Services section that appears below, select the schedule used in previous steps and do
the following:
Double click the Routing Svc column and select Auto to active the schedule.
Enable overflow by putting a check in the Overflow checkbox

5.2.3 SIP Trunk Routing table Configuration

1. Navigate to Configuration
2. Select the Public tab
3. Click on the Accounts tab
4. Select the first Skype account
5. In the Details for Accounts table below, in the drop down list next to Called Number Characters
to absorb select the number of digits that will be absorbed by the SIP trunking component
before sending the dialed digits to Skype. The number selected here should be the number
digits in the External Number configured in Step 10
6. Click on the Routing Table tab
7. Click on the Add button
8. In the Add Route dialog box;
Provide a descriptive name for the new route in the Name.
NC; Reviewed:
Avaya BCM Solutions Test Lab
10/01/2010
Telephony
Resources
Application Notes
©2010 Avaya Inc. All Rights
Reserved.
Scheduled Services
IP Trunks
SIP Trunking
ConfiguringSIPTrunkingSkype-BCM6
11 of 14
Page 11 of 14