Lexmark MS810n Handleiding voor verhuizen

Blader online of download pdf Handleiding voor verhuizen voor {categorie_naam} Lexmark MS810n. Lexmark MS810n 3 pagina's. Ms810 series monochrome laser printer
Ook voor Lexmark MS810n: Aansluithandleiding (6 pagina's), Informatie handleiding (1 pagina's), Handmatig (20 pagina's), Papieren handleiding (4 pagina's), Menu Kaart (3 pagina's), Setupblad (2 pagina's), Handleiding Afdrukfouten (1 pagina's), Handmatig (17 pagina's), Handleiding voor afdrukken (18 pagina's), Mono kwaliteitshandboek (1 pagina's), Productspecificaties (2 pagina's), Productspecificaties (2 pagina's)

Moving Guide

Before moving the printer

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer

damage:

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If two or more optional finishers are installed, then remove the finishers individually from the printer.

Notes:

–

Make sure to remove the topmost finisher first.

–

To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.

•

If the printer does not have a caster base but is configured with optional trays, then remove the trays.

Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place.

Moving Guide

Page 1 of 3