Gardena 14774 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gardena 14774. Gardena 14774 13 pagina's. Battery pruning lopper/battery telescopic pruning lopper

Pagina afdrukken

4.2.2 To clean the battery charger:

v Clean the contacts and the plastic parts with a soft and dry cloth.

5. STORAGE

5.1 To put into storage:

The product must be stored away from children.

1. Remove the battery.

2. Slide the protective cover over the blade.

3. Charge the battery.

4. Clean the lopper, the battery and the battery charger

(see 4. MAINTENANCE).

5. Store the lopper, the battery and the battery charger in a dry, enclosed

and frost-free place.

6. TROUBLESHOOTING

DANGER!

Cutting injury due to the blade!

Risk of cut injury due to accidental starting.

v Use gloves.

v Remove the battery.

v Slide the protective cover over the blade.

6.1 Troubleshooting table:

Problem

Possible Cause

Start lever cannot

Start lever is stuck.

be pushed

Lopper does not start

Battery is empty.

or stops.

(L1)

LED

blinks green

[ Fig. O4 ]

Lopper does not start

Battery temperature is outside

or stops.

the permissible temperature

Error-LED

(Wp)

lights red

range.

[ Fig. O4 ]

There are drops of water or

moisture between the battery

contacts.

Obstacle blocks the motor.

Lopper does not start

Lopper is defective.

or stops.

(Wp)

Error-LED

blinks red

[ Fig. O4 ]

Lopper does not start

Battery is not put completely

or stops.

into the battery holder.

(Wp)

Error-LED

does not

light [ Fig. O4 ]

Battery is defective.

Lopper is defective.

Charging is not possible.

Battery is not slid onto the

Battery charge indicator

(Lc)

charger correctly.

lights continuously green

Battery contacts are dirty.

[ Fig. O3 ]

Battery temperature is outside

the permissible temperature

range.

Battery is defective.

Charging is not possible.

Mains plug of the charger is

(Lc)

Battery charge indicator

not plugged in correctly.

does not light

Mains socket, mains cable or

[ Fig. O3 ]

charger is defective.

NOTE:

Repairs must only be done by the GARDENA service departments or

specialist dealers approved by GARDENA.

v For any other malfunctions please contact the GARDENA service

department.

7. TECHNICAL DATA

Lopper

Max. branch diameter

Max. cuts per battery charge

Range of extension of

the telescopic tube

Max. Height (with telescopic

tube extended)

Weight (without Battery)

Sound pressure level L

Uncertainty k

Sound power level L

measured/guaranteed

Uncertainty k

Hand/arm vibration a

Uncertainty k

Measuring process complying with:

Remedy

exposure. The vibration emission value can vary during actual use of the electric power

v Loosen the start lever.

tool depending on the ways in which the machine is used. As a safety measure, you

should work with the machine for a maximum of 1 hour without interruption.

v Charge the battery.

System Battery

PBA 18V 2.0Ah W-B

v Wait until the battery

Battery voltage

temperature is between

0 °C – 35 °C again.

Battery capacity

v Remove the water drops or

Number of cells (Li-Ion)

moisture with a dry cloth.

Appropriate POWER FOR ALL

system Battery Chargers

v Remove the obstacle.

v Contact the GARDENA

Battery Charger

Service.

AL 1810 CV P4A

Mains voltage

v Put the battery completely

Mains frequency

into the battery holder until

it audibly engages.

Rated power

v Replace the battery.

Battery charging voltage

v Contact the GARDENA Service.

Max. battery charging

current

v Slide the battery onto the

charger correctly.

Battery charging time

(approx.)

v Clean the battery contacts

(e. g. by connecting and dis-

connecting the battery several

times. Replace the battery if

necessary.

Permitted charging

temperature range

v Wait until the battery

temperature is between

Weight according to

0 °C – + 35 °C again.

EPTA-Procedure 01:2014

v Replace the battery.

Protection class

v Insert the mains plug com-

Appropriate POWER FOR ALL

pletely into the mains socket.

system Batteries

v Check the mains voltage.

Let the charger be checked

if necessary by an authorised

8. ACCESSORIES / SPARE PARTS

specialist dealer or the

GARDENA Service.

GARDENA Extension tube

Unit

Value

(Art. 14772)

PBA 18V 2.0Ah W-B

400

PBA 18V 2.5Ah W-B

500

PBA 18V 3.0Ah W-B

600

PBA 18V 4.0Ah W-C

800

PBA 18V 5.0Ah W-C

1000

PBA 18V 6.0Ah W-C

1200

–

110

1.9

dB (A)

76 / 79

dB (A)

≤ 2.5

m/s

vhw

1.5

vhw

EN IEC 62841-4-2

NOTE: The stated vibration emission value has been measured according to

a standardised test procedure and can be used for comparison of one electric

power tool with another. It can also be used for preliminary evaluation of

Unit

Value (Art. 14902)

V (DC)

2.0

AL 1810 CV / AL 1815 CV / AL 18V-20 /

AL 1830 CV / AL 1880 CV

Unit

Value (Art. 14900)

V (AC)

220 – 240

50 – 60

V (DC)

1000

PBA 18V 2,0Ah W-B

min.

115

PBA 18V 2,5Ah W-B

min.

136

PBA 18V 4,0Ah W-C

min.

228

°C

0 – 35

0.17

PBA 18V

To extend Art. 14774 or as

a replacement.

Value

(Art. 14774)

(Art. 14776)

400

500

600

800

1000

1200

215 – 255

320 – 360

255

360

3.4

4.1

77 / 80

≤ 2.5

1.5

RL 2000/14/EC / S.I. 2001/1701

/ II

Art. 14772-20.630.00

available via GARDENA

Service