Fronius TransPocket 150/EF Procedure bijwerken

Blader online of download pdf Procedure bijwerken voor {categorie_naam} Fronius TransPocket 150/EF. Fronius TransPocket 150/EF 7 pagina's.

Update procedure TransPocket 150/180 + PN´s

TransPocket 150/EF (4,075,210), TransPocket 150/np (4,075,210,008), TransPocket 150 RC/EF (4,075,211),

TransPocket 150 TIG/EF (4,075,212), Transpocket 150/CH (4,075,210,003), TransPocket 150/G

(4,075,210,002), TransPocket 180/EF (4,075,213), TransPocket 180/np (4,075,213,008), TransPocket 180

MV/np (4,075,213,638), TransPocket 180/CH (4,075,213,003), TransPocket 180 MV/G (4,075,213,632),

TransPocket 180 RC/EF (4,075,214), TransPocket 180 TIG/EF (4,075,215), TransPocket 180 TIG/MV/B

(4,075,215,631), TransPocket 180 TIG/MV/np (4,075,215,638)

09/2018

1) You have to open the control board, unscrew this 2 screw to open

it.

Screwdriver Torx - T25 VDE (42,0435,0041)

2) On the inside of the control board you can see the port for the

USB 2.0 Micro B cable

3) Connect the USB 2.0 Micro B cable with the control board

Datum: 19.09.2018

Zeichen:

1/7