A&L Furniture Harmony Home Montage-instructies - Pagina 2
Blader online of download pdf Montage-instructies voor {categorie_naam} A&L Furniture Harmony Home. A&L Furniture Harmony Home 3 pagina's. Adult bed
Pagina afdrukken
PARTS
(included)
A
Headboard (1)
Footboard (1)
B
Headboard Posts (2)
C
Side Rails (2)
D
Mattress Boards (5)
STEP 1
To attach the headboard posts to the headboard, insert the screw attached to the post into the headboard
cap & slide in against the headboard. (See photo 1.) If the screw is too tight or too loose you can adjust it
with the Allen wrench. Next insert the 4¾" bolts through the posts & screw into the headboard. Tighten the
bolts using the Allen wrench. (See photos 2 & 3.) Note: Make sure the notches in the posts are on the
same side.
photo 1
STEP 2
Attach the side rails to the headboard & footboard. Place the side rails in the notch in the posts with the
hanger bolts going in the predrilled holes & fasten with the 8 joint connector bolts. Tighten with the Allen
wrench. (See photos 4 & 5.)
A
D
A
C
C
photo 4
HARDWARE
(included)
4¾" Bolts (4)
a
b
Joint Connector Bolts (8)
c
1¾" Woodscrews (20)
d
Allen Wrench (1)
e
Square Drive Bit (1)
TOOLS NEEDED
Screwgun
C
a
photo 2
photo 5
a
photo 3
b