A&S Studio Bar 200 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} A&S Studio Bar 200. A&S Studio Bar 200 16 pagina's. 2.1 bar with built-in subwoofer 200

Pagina afdrukken

To disconnect the Bluetooth function, you can :

Switch to another function on the unit.

Disable the function from your Bluetooth device.The Bluetooth device will be disconnected from

the soundbar after the "Disconnected" voice prompt.

Press and hole the

Tips:

1 Enter 0000 for the password if necessary.

2 If there is an existing connection, press and hold the

re-activate the pairing mode, the connection will be interrupted.

3 If no other Bluetooth device pairs with this player within two minutes, the player will recover its

previous connection.

4 The player will also be disconnected when your device is moved beyond the operational range.

5 If you want to reconnect your device to this player, place it within the operational range.

6 If the device is moved beyond the operational range, when it is brought back, please check if the

device is still connected to the player.

7 If the connection is lost, follow the instructions above to pair your device to the player again.

Listen to Music from Bluetooth Devices

If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can

listen to the music stored on the device through the player.

If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's

remote control to play music stored on the device.

1. Pair your device with the player.

2. Play music via your device (if it supports A2DP).

3. Use supplied remote control to control play (if it supports AVRCP).

- To pause/resume play, press the

- To skip to a track, press the

/PAIR button on the remote control.

buttons on the remote control.

/PAIR button on the remote control to

/PAIR button on the remote control.