AEG 944 187 934 Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG 944 187 934. AEG 944 187 934 48 pagina's.
Pagina afdrukken
- 1. Table of Contents
- 2. Safety Information
- 3. Safety Instructions
- 4. Product Description
- 5. Control Panel
- 6. Before First Use
- 7. Daily Use
- 8. Clock Functions
- 9. Automatic Programmes
- 10. Using the Accessories
- 11. Additional Functions
- 12. Hints and Tips
- 13. Care and Cleaning
- 14. Troubleshooting
- 15. Energy Efficiency
4
www.aeg.com
If the mains power supply cable is damaged, it must
•
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Excessive spillage must be removed before the
•
pyrolytic cleaning. Remove all parts from the oven.
To remove the shelf supports first pull the front of the
•
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
The means for disconnection must be incorporated in
•
the fixed wiring in accordance with the wiring rules.
Use only the food sensor (core temperature sensor)
•
recommended for this appliance.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
• Keep the minimum distance from
other appliances and units.
• Before mounting the appliance, check
if the oven door opens without
restraint.
• The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.
Cabinet minimum
height (Cabinet under
the worktop minimum
height)
Cabinet width
Cabinet depth
Height of the front of
the appliance
Height of the back of
the appliance
Width of the front of
the appliance
Width of the back of
the appliance
Depth of the appli‐
ance
Built in depth of the
appliance
Depth with open door
Ventilation opening
minimum size. Open‐
ing placed on the bot‐
tom rear side
600 (600) mm
550 mm
605 (580) mm
594 mm
576 mm
549 mm
548 mm
567 mm
546 mm
1017 mm
550 x 20 mm