AEG 947727362 Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG 947727362. AEG 947727362 28 pagina's.
Pagina afdrukken
4
www.aeg.com
WARNING: Ensure that the appliance is switched off
•
before replacing the lamp to avoid the possibility of
electric shock.
WARNING: The appliance and its accessible parts
•
become hot during use. Care should be taken to
avoid touching heating elements.
Always use oven gloves to remove or put in
•
accessories or ovenware.
Use only the food sensor (core temperature sensor)
•
recommended for this appliance (for selected models
only).
This appliance can be used up to a maximum altitude
•
of 4,000 metres above sea level.
Racks and trays should be inserted as far as they will
•
go into the shelf supports. The mechanical safety locks
that prevent them from being removed must face
downwards and towards the back of the oven cavity.
To remove the shelf supports first pull the front of the
•
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal
•
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Follow the installation instructions
supplied with the appliance.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
• Do not use the appliance before
installing it in the built-in structure.
• Do not install or use a damaged
appliance.
• Remove all the packaging.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Keep the minimum distance from
other appliances and units.
• Before mounting the appliance, check
if the oven door opens without
restraint.
• The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.