Alinco DR-510T Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Alinco DR-510T. Alinco DR-510T 16 pagina's. Vhf/uhf dual band fm transceiver
Ook voor Alinco DR-510T: Gebruiksaanwijzing (8 pagina's)

Pagina afdrukken

TONE SQUELCH (CTCSS)

This function allows you to remain

squelched until the proper Tone Fre-

quency is received. If you are on a busy

frequency, this can be quite an ald.

1. Press the TONE key. The "ENG"

will appear on the display panel.

Press the TONE key again. The

"DEC" will appear next to the

"ENG".

2. Your radio will now remain squel

ched until the proper code is re

ceived.

You should ensure all stations, you

wish to communicate with, use the

same Tone Frequency.

3. To release the Tone Squelch func

tion

(Normal

noise

activate

squelch), press the TONE key

again. The "ENG" and "DEG" will

disappear from the display.

(DR-510E: Option)

REPEATER Operation

All amateur radio repeaters utilize a

separate receiver and transmitter sec-

tion. The receiver frequency may be

either above or below the transmitter

frequency.

This transceiver allows you to störe

the frequency. offset frequency (0.6,

1.6,5.0 and 7.6 MHz.) and offset direc-

tion in Memory Ghannel (1-9 and

A-E).

To select the desired transmitter offset

direction, press the SHIFT key.

Each time you press the key, the radio

will advance from one offset to the

other, i.e.

to "+" to "Dual".

To select the desired transmitter offset,

press the SHIFT key, and then rotate

the Main Dial or depress UP/DOWN

button on the microphone. Each time

you rotate or depress these controls,

the radio will advance through the

following steps: "0" to "0.6" to "1.6" to

"5" to "7.6" in MHz. After the offset has

been stored, press any key, except the

SHIFT key, or depress the PTT switch.

The normal display will return.

REVERSE Function

The REV key has been provided to

allow you to reverse the transmit and

receive frequencies. To use the Re

verse function, press the REV key. The

REV indicator will light in the display to

remind you that you are working a

reverse repeater pair.

To return to normal Operation, press

the REV key again.

-13-