AEG BC5003001 Gebruikershandleiding - Pagina 29

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG BC5003001. AEG BC5003001 36 pagina's.

Pagina afdrukken

Hold the door trim (B) on the top edge

of the door at the two sides and push

inwards to release the clip seal.

Pull the door trim to the front to re-

move it.

Hold the door glass panels on their top

edge one by one and pull them up out

of the guide

Clean the door glass panels.

To install panels follow the procedure in re-

verse. Install the smaller panel first, then the

larger.

WHAT TO DO IF...

WARNING!

Refer to "Safety information" chapter.

Problem

The oven does not heat up

The oven lamp does not oper-

ate

The pyrolytic cleaning does not

operate (the clock display

shows „C1")

Possible cause

The appliance is switched off

The clock is not set

The necessary settings are not

set

The automatic cut-out is

switched on

The fuse is released

The oven lamp is defective

The shelf support/telescopic

runners are not removed

What to do if...

Solution

Switch on the appliance

Set the clock. Refer to "Setting

the clock"

Make sure, the settings are cor-

rect

Refer to „Automatic cut-out"

Make sure, if the fuse is the

cause for the malfunction. If

the fuse releases again and

again, refer to an authorized

electrician

Replace the oven lamp.

Remove support/telescopic

runners