AEG BCS551020M Gebruikershandleiding - Pagina 29

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG BCS551020M. AEG BCS551020M 36 pagina's.
Ook voor AEG BCS551020M: Gebruikershandleiding (40 pagina's)

Pagina afdrukken

10.3 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

Install the shelf supports in the opposite

sequence.

10.4 Catalysis

CAUTION!

Do not clean the catalytic

surface with oven sprays,

abrasive cleaning agents,

soap or other cleaning

agents. This will damage the

catalytic surface.

Clean the inner glass of the oven door

with warm water and a soft cloth.

Remove all accessories.

The walls and the top of the cavity are

coated with catalytic enamel. It gathers

fat and dirt which burns off at high

temperatures without leaving a smell.

To support this self-cleaning process

heat the empty appliance regularly.

Spots or discolouration of

the catalytic surface have no

effect on its catalytic

properties.

1. Set the Catalysis function. Refer to

"Oven functions".

The display shows CATA and the

duration of the cleaning procedure (1

hour). You cannot change the duration,

but you can use the End function to

delay the start of the cleaning procedure.

An acoustic signal sounds after the time

ends. The appliance deactivates.

2. Push a button to stop the acoustic

signal.

3. Clean the bottom of the appliance

with a damp soft sponge.

To stop Catalysis before it finishes, turn

the knob for the oven functions to the off

position.

10.5 Cleaning reminder

As a reminder that catalytic cleaning is

necessary, CATA flashes in the display

for 10 seconds after each activation and

deactivation of the appliance.

The cleaning reminder

goes out:

• after the end of the

Catalysis function.

• if you press

the same time.

10.6 Catalytic fan cover