Alinco DR-MD500 Gebruiksaanwijzing - Pagina 16
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Alinco DR-MD500. Alinco DR-MD500 20 pagina's. Vhf/uhf dual band digital transceiver
Pagina afdrukken
Front panel
8
9
Basic Functions
NO. KEY
FUNCTION
Press to power On. Press and hold for 2 seconds to
1
Power Key
turn Off the transceiver.
VOL A knob
Adjust audio level of channel A.
2
VOL B knob
Adjust audio level of channel B.
Rotate to choose a frequency/channel. In scan
mode, rotate to change scan directions.
CH knob
3
( channel
Press: To use the pre-programmed function.
selector)
Press and hold: To use the pre-programmed
function.
Press to enter function menu set up.
Press to select/confirm a selection.
Press and hold[MENU] key until the LCD display
4
MENU key
"Next Please Press Dial Key", press the number key,
it will perform the programmed function.
Combination key function shall be setup in PC
software-Public-Hot key.
6
3
7
4
5
Getting Acquainted
Press : Press to return to previous menus.
Press to delete characters when texting message.
5
EXIT key
Press and hold to active keypad lock.
Press/ press and hold these keys to use the pre-
6
P1-P6 key
programmed functions.
In the radio menu setting, P1 is up key and P2 is down key.
7
MIC connector
Connector to connect the speaker mic.
Constant Red : Transmitting
Constant Green : Analog Receiving
8
LED indicator
Constant Cyan : Digital Receiving
Flashing Green : Scan
Constant Orange : Repeater function.
Displays frequencies, channels and other operating
9
LCD Display
parameters.
Features, channels of operation and functions may be blocked by the
dealer programming.
Rear panel
1
2
NO. KEY
FUNCTION
1
Ext. Dual Speakers To connect external stereo speaker.
2
Ext.Single Speaker To connect external mono speaker.
3
Antenna Connector Connect a 50Ω antenna.
4
Fan
Set fan control in PC software and by manual setting.
3
4
3
6