Alinco EDX-3 Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Alinco EDX-3. Alinco EDX-3 16 pagina's. Hf automatic antenna tuner

Operation

Please read the instruction manuals of Alinco HF transceivers for the

operation.

EDX-3 is a complete replacement of previous EDX-2, and operation is totally

the same.

EDX-3 supports all ALINCO DX-series HF transceivers that EDX-2 is usable.

To reduce the risk of electric shock and RF noise, please follow the

instruction below.

• Separate the transceiver and EDX-3 as far as possible. Roll and store the

• Other cables and metal devices such as DC cable, CW keyer or microphone and

• NEVER transmit without the element being connected.

Be sure to take tune every time you change the operating frequency even

within the same band.

When "TUNE" icon disappears from the display of the transceiver after

tuning, transmit at full-power and make sure the RF meter on the display

shows the max indication. If tuning is not complete, the poor SWR

protection function limits the output and displays less segments.

EDX-3 is made especially for genuine Alinco HF transceivers.

Alinco can't provide any connection information for transceivers of

CAUTION

other manufacturers.

excessive length of cables and keep away from the transceiver and tuner.

cables etc should also be kept as far away as possible from the cables

connected to the tuner.

INSTALLATIONS