Garmin Zumo 500 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin Zumo 500. Garmin Zumo 500 30 pagina's. Garmin zumo 500: quick start
Ook voor Garmin Zumo 500: Snelle referentiehandleiding (2 pagina's), Installatieblad (2 pagina's), Snelle referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (46 pagina's)

Pagina afdrukken

ETTING

TARTED

Step 1: Connecting Power to the Mount

Select a suitable location to mount the zūmo on your motorcycle based on available

power sources and safe power cable routing.

Power connector

Step 2: Mounting the zūmo

This section illustrates two possible installation solutions: A) install the U-bolt on the

handlebar and B) install the handlebar base to the clutch/brake clamp bracket. Custom

mounts may require additional hardware (xref to Ram Web site?).

A) To install the U-bolt and handlebar

base:

1. Place the U-bolt around the handlebar,

and thread the ends through the

handlebar base.

2. Tighten the nuts to secure the base.

Bare wires with inline fuse for

power connection

Handlebar

base

Handlebar

zūmo 500/550 Owner's Manual

B) To install the handlebar base to the clutch/brake clamp bracket:

NOTE: Both 1/4" standard and M6 bolts are included. Match the size of the factory

bolts on your clutch/brake clamp braket.

1. Remove the two factory bolts

on your clutch/brake clamp

bracket.

2. Thread the new bolts through

the handlebar base, spacers,

and clamp bracket.

3. Tighten the bolts to secure the

base.

To attach the base plate to the

zūmo cradle mount:

1 Thread the M4 x 40mm ﬂathead

U-bolt

bolts and nuts to attach the base

plate to the zūmo cradle mount.

2. Tighten the nuts to secure the

base plate.

zūmo 500/550 Owner's Manual

ETTING

TARTED

Handlebar

Clutch/brake

base

clamp bracket

Spacers

zūmo cradle

mount

Base plate