Garmin A03191 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin A03191. Garmin A03191 16 pagina's.

Pagina afdrukken

Insert the new battery under the two plastic tabs

positive side facing up.

NOTE: Do not damage or lose the O-ring gasket.

The O-ring gasket should remain around the outside of the

raised plastic ring.

Replace the front cover and the four screws.

Observe the orientation of the front cover. The raised screw

should fit in the matching raised screw hole on the front

cover.

NOTE: Do not overtighten.

Replace the sleeve.

After you replace the heart rate monitor battery, you may need

to pair it with the device again.

Troubleshooting

Support and Updates

Garmin Express

(www.garmin.com/express) provides easy

™

access to these services for Garmin devices.

• Product registration

• Product manuals

• Software updates

• Data uploads to Garmin Connect

Getting More Information

• Go to www.garmin.com/support for additional manuals,

articles, and software updates.

• Go to www.garmin.com/intosports.

• Go to www.garmin.com/learningcenter.

• Go to http://buy.garmin.com, or contact your Garmin dealer

for information about optional accessories and replacement

parts.

Acquiring Satellite Signals

The device may need a clear view of the sky to acquire satellite

signals. The time and date are set automatically based on the

GPS position.

Go outdoors to an open area.

The front of the device should be oriented toward the sky.

Wait while the device locates satellites.

It may take 30–60 seconds to locate satellite signals.

Improving GPS Satellite Reception

• Frequently sync the device to your Garmin Connect account:

◦ Connect your device to a computer using the USB cable

and the Garmin Express application.

◦ Sync your device to the Garmin Connect Mobile app using

your Bluetooth enabled smartphone.

◦ Connect your device to your Garmin Connect account

using a Wi‑Fi wireless network.

While connected to your Garmin Connect account, the device

downloads several days of satellite data, allowing it to quickly

locate satellite signals.

• Take your device outside to an open area away from tall

buildings and trees.

• Remain stationary for a few minutes.

Resetting the Device

If the device stops responding, you may need to reset it.

NOTE: Resetting the device may erase your data or settings.

Hold

for 15 seconds.

with the

The device turns off.

Hold

Updating the Software

Before you can update your device software, you must have a

Garmin Connect account, and you must download the Garmin

Express application.

Connect the device to your computer using the USB cable.

When new software is available, Garmin Express sends it to

your device.

Follow the on-screen instructions.

Do not disconnect your device from the computer during the

update process.

NOTE: If you have already used Garmin Express to set up

your device with Wi‑Fi connectivity, Garmin Connect can

automatically download available software updates to your

device when it connects using Wi‑Fi.

My daily step count does not appear

The daily step count is reset every night at midnight.

If dashes appear instead of your step count, allow the device

to acquire satellite signals and set the time automatically.

My device does not beep in cold weather

For optimal performance in cold weather, the device

automatically turns off key tones and alert tones.

Software License Agreement

BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE

TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE

LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT

CAREFULLY.

Garmin Ltd. and its subsidiaries ("Garmin") grant you a limited

license to use the software embedded in this device (the

"Software") in binary executable form in the normal operation of

the product. Title, ownership rights, and intellectual property

rights in and to the Software remain in Garmin and/or its third-

party providers.

You acknowledge that the Software is the property of Garmin

and/or its third-party providers and is protected under the United

States of America copyright laws and international copyright

treaties. You further acknowledge that the structure,

organization, and code of the Software, for which source code is

not provided, are valuable trade secrets of Garmin and/or its

third-party providers and that the Software in source code form

remains a valuable trade secret of Garmin and/or its third-party

providers. You agree not to decompile, disassemble, modify,

reverse assemble, reverse engineer, or reduce to human

readable form the Software or any part thereof or create any

derivative works based on the Software. You agree not to export

or re-export the Software to any country in violation of the export

control laws of the United States of America or the export control

laws of any other applicable country.

BSD 3-Clause License

Redistribution and use in source and binary forms, with or

without modification, are permitted provided that the following

conditions are met:

• Redistributions of source code must retain the above

disclaimer.

for one second to turn on the device.

Appendix

Troubleshooting