Garmin D2 Bravo Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin D2 Bravo. Garmin D2 Bravo 28 pagina's.
Ook voor Garmin D2 Bravo: Gebruikershandleiding (36 pagina's)

Pagina afdrukken
Garmin D2 Bravo Gebruikershandleiding
• Select Til Sunrise > Status > On.
4
Select Time, and enter the time.

Navigation

Saving Your Location
You can save your current location to navigate back to it later.
1
Hold UP.
2
Select Save Location.
3
Follow the on-screen instructions.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course. When you start navigating, you can choose the activity
to be used while traveling to your destination, such as hiking,
running, or biking. If you are already recording an activity when
you start navigation, the device continues to record the current
activity while navigating.
1
Hold UP.
2
Select Navigation.
3
Select a category.
4
Respond to the on-screen prompts to choose a destination.
5
Select Go To.
6
Select an activity.
Navigation information appears.
7
Select START to begin navigation.
8
Select UP or DOWN to view additional data pages (optional).
Navigating with Sight 'N Go
You can point the device at an object in the distance, such as a
water tower, lock in the direction, and then navigate to the
object.
1
Hold UP.
2
Select Navigation > Sight 'N Go.
3
Point the top of the watch at an object and select START.
4
Select an activity.
Navigation information appears.
5
Select START to begin navigation.
6
Select UP or DOWN to view additional data pages (optional).
Compass
The device has a 3-axis compass with automatic calibration.
The compass features and appearance change depending on
your activity, whether GPS is enabled, and whether you are
navigating to a destination. You can manually change the
compass settings
(Compass Settings, page
Map
represents your location on the map during flying activities.
represents your location on the map during non-flying activities.
Location names and symbols appear on the map. When you are
navigating to a destination, your route is marked with a line on
the map.
• Map navigation
(Panning and Zooming the Map, page
• Map settings
(Customizing Map Features, page
Panning and Zooming the Map
1
While navigating, select UP or DOWN to view the map.
2
Hold UP.
3
Select Pan/Zoom.
4
Select an option:
Navigation
Navigating To Your Starting Point
You can navigate back to the starting point of your track or
activity along the path you traveled. This feature is available only
for activities that use GPS.
Altimeter and Barometer
The device contains an internal altimeter and barometer. The
device collects altimeter and barometer data continuously, even
in low-power mode. The altimeter displays your approximate
elevation based on pressure changes. The barometer displays
environmental pressure data based on the fixed elevation where
the altimeter was most recently calibrated
page
History includes time, distance, calories, average pace or speed,
lap data, and optional ANT+ sensor information.
NOTE: When the device memory is full, your oldest data is
overwritten.
Using History
History contains previous activities you have saved on your
device.
1
2
3
4
16).
11)
16)
Viewing Your Time in Each Heart Rate Zone
Before you can view heart rate zone data, you must pair your
device with a compatible heart rate monitor, complete an
activity, and save the activity.
Viewing your time in each heart rate zone can help you adjust
your training intensity.
• To toggle between panning up and down, panning left and
right, or zooming, select START.
• To pan or zoom the map, select UP and DOWN.
• To quit, select BACK.
During an activity, select STOP > TracBack.
Your current location
and track to follow
map.
16).

History

Hold UP.
Select History > Activities.
Select an activity.
Select an option:
• To view additional information about the activity, select
Details.
• To select a lap and view additional information about each
lap, select Laps.
• To select an interval and view additional information about
each interval, select Intervals.
• To view the activity on a map, select Map.
• To navigate in reverse the path you traveled for the
activity, select TracBack
Point, page
11).
• To delete the selected activity, select Delete.
• To navigate the path you traveled for the activity, select
Go.
appear on the
(Altimeter Settings,
(Navigating To Your Starting
11