Garmin D2 Pilot Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin D2 Pilot. Garmin D2 Pilot 24 pagina's.
Ook voor Garmin D2 Pilot: Snelstarthandleiding (4 pagina's), Gebruikershandleiding (24 pagina's), Snelstarthandleiding (4 pagina's)

Pagina afdrukken

Low Power Mode

Tracking or Navigation Modes

The compass page displays the

time of day

, direction of travel in

degrees

, and cardinal direction

The altimeter page displays the

time of day

, pressure altitude

, and barometric pressure

The temperature page displays the

time of day

, temperature

and density altitude

The compass page displays the

bearing to the nearest airport

compass ring

, and direction of

travel in degrees

(tracking

mode only).

The horizontal situation indicator

(HSI) displays the course line

pointer

, bearing to the next

waypoint

, to-and-from indicator

, and course deviation indicator

(CDI)

. The dots

indicate the

distance of deviation (navigation

mode only).

The altimeter page displays the

alert altitude

(Setting the

Altitude

Alert), pressure altitude

, and barometric pressure

The temperature page displays the

time of day

, temperature

and density altitude

The map displays your current

location and direction

, the route

to your next waypoint

, and the

bearing to your next waypoint

The nearest airport page displays

the airport identifier

, bearing to

the airport

, distance to the

airport

, track over ground

and the estimated time to the

airport

Tracking or Navigation Modes

Setting the Altitude Alert

You can set an alarm to vibrate when you reach a specified

altitude.

NOTE: The altitude alert is not available in low power mode.

From the time of day page, select

appears.

Select the action key.

Select Set Alert.

Enter the altitude at which the alert is triggered.

Setting the Barometric Pressure

You can manually enter the current barometric pressure. This

can help to improve the accuracy of the pressure altitude

reading.

From the time of day page, select

appears.

Select the action key.

Select Set Baro..

Enter the current barometric pressure.

Turning on a Sensor Mode

The default sensor mode is on demand mode, which offers you

quick access to compass, altimeter, barometer, or temperature

data. You can also put the device in always on mode to display

continuous sensor data.

NOTE: If you have an optional heart rate monitor or speed and

cadence sensor paired with the device, your device can display

continuous heart rate or speed and cadence data.

Select the action key.

Select Setup > Sensors > Mode > Always On.

Acquiring Satellite Signals and Recording a

Track

Before you can use the GPS navigation features, such as

recording a track, you must acquire satellite signals.

The time and date are set automatically based on the GPS

position.

Select the action key.

Select Start GPS.

Go to an area with a clear view of the sky and remain

stationary while the device acquires satellite signals.

indicates the device acquired satellite signals

successfully.

Walk around or travel to record a track.

Your distance and time appear.

Select

to view the loop of data pages.

Hold

The instruments page displays

your ground speed

, altitude

track over ground

, and the

vertical speed in feet per minute

The next waypoint page displays

the waypoint name

, bearing to

the waypoint

, distance to the

waypoint

, track over ground

and the estimated time to the next

waypoint

(navigation mode

only).

until the altimeter page

Introduction